Creating centos/ppc64le cloud image


CentOS 7.2/ppc64le has been released for months, but there is no official centos cloud images  for Power users on .

Although there are many posts on the Internet about how to create a cloud image,  there are still a few caveats we need to pay attention to.

Below are the steps I took to create a centos 7.2 cloud image for ppc64le.


1) Prepare a Power server with KVM virtualization enabled and Internet access.

This can be IBM PowerLinux servers with PowerKVM or other KVM such as Ubuntu KVM(OpenPower servers with Ubuntu/Fedora KVM also work).

2) Download CentOS/ppc64le ISO image to /data/isos folder on your Power server.

A net-install iso image is not used,  because net install makes it difficult to customize the root disk partition layout.

3) Prepare a 5GB qcow2 disk file

# qemu-img create -f qcow2 /tmp/centos7.qcow2 5G

CentOS VM Installation

1)  Start the installation

# virt-install --virt-type kvm --name centos7 --ram 1024 \
  --disk /tmp/centos7.qcow2,format=qcow2 \
  --network network=default \
  --graphics vnc,listen= --noautoconsole \
  --os-type=linux --os-variant=rhel7 \

After the installation process started, use VNC client to finish the following installation steps. If installing from a PowerKVM host, we can use the kimchi web interface to get VNC console to the current VM.

屏幕快照 2016-06-14 09.43.11

2) Configure the disk partition layout manually

屏幕快照 2016-06-14 09.49.06

Choose “Standard Partition” scheme and create two partitions.

First create a 8MB preboot partition

屏幕快照 2016-06-14 09.53.55

Then create the 2nd partition as “/”. (Leave capacity field blank will use up all remaining space of this disk)

屏幕快照 2016-06-14 10.00.10

And the result partition layout is as below

屏幕快照 2016-06-14 10.04.55

Press “Done” to confirm the partition layout and ignore the warnings. Accept changes to confirm the partition layout on the disk.

3) Turn on Ethernet.

屏幕快照 2016-06-14 10.09.52


4) Step through the installation with default settings for other configuration items.

During the installation, create a “centos” user as admin.

屏幕快照 2016-06-14 10.15.16

Ignore the “failed to write boot loader configuration” warning and continue with installation:

屏幕快照 2016-06-14 10.21.20

5) reboot VM once installation completed, and then use “virsh dumpxml <vm-image>” command to determine the right cdrom device name.

# virsh dumpxml centos7

    <disk type='block' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <target dev='sdb' bus='scsi'/>
      <alias name='scsi0-0-0-1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
    <controller type='usb' index='0'>

And run the following command to detach it with an empty CDROM.

# virsh attach-disk --type cdrom --mode readonly centos7 "" sdb
# virsh reboot centos7

Run the first command line twice if you see any error like this:

internal error: unable to execute QEMU command 'eject': Device 'drive-scsi0-0-0-1' is locked

Post-installation customization

1) Login to CentOS VM and update system with “#yum update -y”

2) Configure EPEL repo

# yum install -y

3) Install the required packages for a cloud image

# yum install cloud-init cloud-utils cloud-utils-growpart -y

4) Modify /etc/cloud/cloud.cfg for a “standard” centos cloud image.

    name: centos
    lock_passwd: true
    gecos: Cloud User
    groups: [wheel, adm, systemd-journal]
    sudo: ["ALL=(ALL) NOPASSWD:ALL"]
    shell: /bin/bash
  distro: rhel

5) Disable zeroconf

# echo "NOZEROCONF=yes" >> /etc/sysconfig/network

6) Configure console

Edit the /etc/default/grub file and configure the GRUB_CMDLINE_LINUX option:

GRUB_CMDLINE_LINUX="crashkernel=auto console=tty0 console=ttyS0,115200n8"

Save changes

# grub2-mkconfig -o /boot/grub2/grub.cfg

7) Disable firewall service by default

# systemctl stop firewalld
# systemctl disable firewalld

8) Shutdown VM instance

# shutdown -h now

9) Remove MAC address (Running from your KVM host OS)

# virt-sysprep -d centos7

10) Compress the cloud image

# virt-sparsify --compress /tmp/centos7.qcow2 \

Finally the cloud image is ready. You can upload the image to your OpenStack cloud now.




Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s